|These Pages include various standards. To confirm the status of any standard, identify the replacement standard if it is obsolete and/or purchase the standard please use.|
Standards and Regulations Useful to Mechanical Engineers (English)
|1||BS 1452:1990||Specification for flake Graphite Cast Iron.|
|2||BS 2789:1985||Specification for spheroidal graphite or nodular graphite Cast Iron|
|3||BS 6681:1986||Specification for malleable CI.|
|4||BS 970 : Part 1 :1996||Wrought Steels - Carbon and Manganese Steels|
|-||BS 970: Part 2:1988||Wrought Steels- Direct hardening alloy steels - Withdrawn/superseded|
|-||BS 970: Part 3:1991||Wrought Steels- Case Hardening steels- Withdrawn/superseded|
|-||BS 970: Part 4:1970||Wrought Steels- Stainless, Heat Resisting and valve steels - Withdrawn/Superseded|
|-||BS 970: Part5:1972||Wrought Steels- Spring steels- Withdrawn/Revised|
|-||BS 970: Part 6:1972||SI metric values for parts 1 to 5 - Withdrawn/Revised|
|5||BS 1449-1.1:1991||Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. General specification|
|-||BS 1449-1.8:1991||Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled narrow strip based on formability|
|-||BS 1449-1.14:1991||Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled narrow strip supplied in a range of conditions for heat treatment and general engineering purposes|
|-||BS 1449....||Other versions of BS 1449 withdrawn /revised/ superseded- See B.S Online for replacement standards..|
|6||BS 1440:1985||Specification for copper alloy ingots and copper alloy and high conductivity copper castings :.withdrawn/superseded|
|7||BS 1470:1987||Specification for wrought aluminium and aluminium alloys
for general engineering purposes: plate, sheet and strip.
Withdrawn superseded /replaced by Parts 1 to 4 of BS EN 485, BS EN 515:1993 and Parts 1 to 4 of BS EN 573.
|8||BS 1471:1972||Wrought Aluminium and Aluminium Alloys.Drawn Tube
withdrawn /superseded/Replaced by BS EN 515:1993, Parts 3 and 4 of BS EN 573 and Parts 1, 2, 7 and 8 of BS EN 754.
|9||BS 1474:1987||Wrought Aluminium and Aluminium alloys ,. Bar, extruded
round tube and sections.
Withdrawn/superseded /replaced by BS EN 515:1993, Parts 3 & 4 of BS EN 573, Parts 1 - 9 of BS EN 755, and Parts 1 & 2 of BS EN 12020.
|10||BS 1501:Part 1:1980||Steels for fired and unfired pressure vessels - Plate
Withdrawn, superseded/replaced by Parts 1 to 3 of BS EN 10028:1993 and BS EN 10029:1991.
|-||BS 1501:Part 2:1988||Steels for pressure purposes. Specification for alloy steels: plates
Withdrawn, superseded/replaced BS EN 10028-4:1995, BS EN 10029:1991
|-||BS 1501:Part 3:1990||Steels for pressure purposes. Specification for corrosion
- and heat-resisting steels: plates, sheet and strip:..
Withdrawn, superseded/Replaced by BS EN 10028-7:2000, BS EN 10029:1991, BS EN 10048:1997, BS EN 10051:1992, BS EN 10258:1997 and BS EN 10259:1997.
|11||BS 1503:1989||Steels for fired and unfired pressure vessels - Forgings
Withdrawn/superseded/replaced by Parts 1 to 5 of BS EN 10222.
|12||BS 2633:1987||Specification for Class 1 welding of ferritic steel pipework for carrying fluids|
|13||BS 2971:1991||Specification for Class 2 welding of carbon steel pipeword for carrying fluids|
|14||BS 3100:1984||Specification for steel castings for general engineering purposes|
|15||BS 1504:1984||Specification for steel castings for pressure purposes|
|16||BS 2803:1980||Specification for Pre-Hardened and Tempered Carbon and Low alloy round steel wire for gen. eng. purposes|
|17||BS 5216:1991||Specification for patented cold drawn steel wire for mechanical springs|
|18||BS 4-1:1993||Structural steel sections. Specification for hot-rolled sections (taper flange joists and channels)|
|19||BS 2994:1976||Specification for cold rolled steel sections. Withdrawn/superseded/replaced by BS EN 10162:2003|
|20||BS 5950-1:2000||Structural use of steelwork in building. Code of practice for design. Rolled and welded sections|