| These Pages include various standards. To confirm the status of any standard, identify the replacement standard if it is obsolete and/or purchase the standard please use. It is also possible to become a BSI member and obtain copies of the Standards at much reduced prices. |
Standards Index
Standards and Regulations Use to Mechanical Engineers (English)
Reference Standards...Mechanical Components
| - | Standard Reference | Title |
| 1 | BS EN ISO 898-1:1999 | Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs |
| 1 | BS EN ISO 898-1:1999 | Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs |
| 2 | BS EN ISO 898-5:1999 | Mechanical properties of fasteners made of carbon steel and alloy steel. Set screws and similar threaded fasteners not under tensile stresses |
| 3 | BS6613:1991 ISO4863 | Methods of specifying resilient shaft couplings |
| 4 | BS3170 | Specification for flexible couplings for power transmission |
| 5 | BS7620:1993 | Specification for industrial belt drives - dimensions of pulleys and v-ribbed belts of PH, PJ, PK, PL and PM profiles |
| 6 | BS4548:1987 | Specification for synchronous belt drives for industrial applications. |
| 7 | BS4235:Pt 1:1986 | Parallel and Taper Keys |
| 8 | BS 3692:2001 | ISO metric precision hexagon bolts, screws and nuts. Specification |
| 9 | BS 4320:1968 | Specification for metal washers for general engineering purposes. Metric series |
| 10 | BS 6322-1: 1982 ISO 4759/1:1991 |
Tolerances for fasteners: Specification for tolerances of bolts, screws,nuts.. |
| - | BS 6322-3: 1982 ISO 4759/3:1991 |
Tolerances for fasteners: Specification for tolerances of plain washers .. |
| 11 | BS 1936:Part 2:1991 | Undercuts and runouts for screw threads: part 2. specification for ISO metric threads. |
| 12 | ISO 1328:1975 | Parallel involute gears - ISO system of accuracy. (Related to BS436) |
| 13 | - | - |
| - | - | - |
| 14 | BS6105:1981 ISO 3506:1979 |
Corrosion Resistant stainless steel Fasteners. |
| 15 | BS3580:1964 | Guide to Design Considerations of The Strength of Screw Threads |
| 16 | BS EN ISO 898-1:1999 | Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs |
| 17 | BS EN 20898-2:1994, ISO 898-2:1992 | Mechanical properties of fasteners. Nuts with specified proof load values. Coarse thread |
| 18 | BS EN ISO 898-5:1999 | Mechanical properties of fasteners made of carbon steel and alloy steel. Set screws and similar threaded fasteners not under tensile stresses |
| 19 | BS EN ISO 898-6:1999 | Mechanical properties of fasteners. Nuts with specified proof load values. Fine pitch thread |
| 20 | BS EN 20898-7:1995, ISO 898-7:1992 | Mechanical properties of fasteners. Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
| 21 | BS EN 20273:1992, ISO 273:1979 | Fasteners. Clearance holes for bolts and screws |
| 22 | BS 3673-4:1977 | Specification for spring retaining rings. Carbon steel circlips - metric series |
| 23 | BS 6186-1:1981, ISO 4156:1981 | Specification for straight cylindrical involute splines: metric module, side fit. Dimensions and tolerances |
| 24 | BS 436-1:1967 | Spur and helical gears.
Basic rack form, pitches and accuracy (diametral pitch series). The BS 436 series to be withdrawn as they are superseded by the IS0 1328 series. |
| - | BS 436-2:1970 | Spur and helical gears.
Basic rack form, modules and accuracy (1 to 50 metric module). The BS 436 series to be withdrawn as they are superseded by the IS0 1328 series. |
- | BS 436-3:1986 | Spur and helical gears. Method for calculation of contact and
root bending stress limitations for metallic involute gears. The BS 436 series to be withdrawn as they are superseded by the IS0 1328 series. |
| - | BS 436-4:1996, ISO 1328-1:1995 | Spur and helical gears. Definitions and
allowable values of deviations relevant to corresponding flanks of gear teeth. The BS 436 series to be withdrawn as they are superseded by the IS0 1328 series. |
| - | BS 436-5:1997, ISO 1328-2:1997 | Spur and helical gears. Definitions and allowable values of deviations
relevant to radial composite deviations and runout information. The BS 436 series to be withdrawn as they are superseded by the IS0 1328 series. |
| 25 | BS ISO 6336-1:1996 | Calculation of load capacity of spur and helical gears. Basic principles, introduction and general influence factors |
| - | BS ISO 6336-2:1996 | Calculation of load capacity of spur and helical gears. Calculation of surface durability (pitting) |
| - | BS ISO 6336-3:1996 | Calculation of load capacity of spur and helical gears. Calculation of tooth bending strength |
| - | BS ISO 6336-5:2003 | Calculation of load capacity of spur and helical gears. Strength and quality of materials |
| 26 | BS 6186-1:1981, ISO 4156:1981 | Specification for straight cylindrical involute splines: metric module, side fit. Dimensions and tolerances |
| 27 | BS 3673-4:1977 | Specification for spring retaining rings. Carbon steel circlips - metric series |
| 28 | BS EN ISO 1234:1998 | Split pins |
| 29 | BS EN ISO 3506-1:1998 | Mechanical properties of corrosion-resistant stainless-steel fasteners. Bolts, screws and studs |
| - | BS EN ISO 3506-2:1998 | Mechanical properties of corrosion-resistant stainless-steel fasteners. Nuts |
| - | BS EN ISO 3506-3:1998 | Mechanical properties of corrosion-resistant stainless-steel fasteners. Set screws and similar fasteners not under tensile stress |
| 30 | BS 4439:1969 | Specification for screwed studs for general purposes. Metric series |
| - | BS EN ISO 3506-4:2003 | Mechanical properties of corrosion-resistant stainless-steel fasteners. Tapping screws |
| - | BS 7751-2:1994 | Prevailing torque type wire thread inserts. Specification for ISO metric fine pitch threads |
| 31 | BS 7751-1:1994 | Prevailing torque type wire thread inserts. Specification for ISO metric coarse pitch threads |
| 32 | BS 7752-1:1994 | Free running type wire thread inserts. Specification for ISO metric coarse pitch threads |
| - | BS 7752-2:1994 | Free running type wire thread inserts. Specification for ISO metric fine pitch threads |