| These Pages include various standards. To confirm the status of any standard, identify the replacement standard if it is obsolete and/or purchase the standard please use. It is also possible to become a BSI member and obtain copies of the Standards at much reduced prices. |
Standards Index
Standards and Regulations Useful to Mechanical Engineers (English)
European Based Steel Standards
| - | Standard Reference | Title |
| Material Standards | ||
| 1 | BS EN 39:2001 | Loose Steel Tubes for Tube and Coupler Scaffolds. |
| 2 | BS EN 10016-1:1995 | Non-alloy steel rods for drawing and/or cold rolling. General requirements |
| 2 | BS EN 10016-2:1995 | Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for general purpose rod |
| - | BS EN 10016-3:1995 | Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for rimmed and rimmed substitute low carbon steel rod |
| - | BS EN 10016-4:1995 | Wrought Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for rod for special applications |
| 3 | BS EN 10025:1993 | Hot rolled products of non-alloy structural steels. Technical delivery conditions |
| 4 | BS EN 10027-1: 1992 | Designation Systems for Steel : Part 1 Steel Names, Principal Symbols |
| - | BS EN 10027-2: 1992 | Designation Systems for Steel : Part 2 Steel Numbers |
| 5 | BS EN 10028-1:2000 | Specification for flat products made of steels for pressure purposes. General requirements |
| - | BS EN 10028-2:2003 | Specification for flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties |
| - | BS EN 10028-2:2003 | Flat products made of steels for pressure purposes - Part 2. Non-alloy and alloy steels with specified elevated temperature properties |
| - | BS EN 10028-3:2003 | Specification for flat products made of steels for pressure purposes. Part 3.Weldable fine grain steels, normalized |
| - | BS EN 10028-4:2003 | Flat products made of steel for pressure purposes Part 4. Nickel alloy steels with specified low temperature propertie |
| - | BS EN 10028-5:2003 | Flat products made of steel for pressure purposes Part 5. Weldable fine grain steels, thermomechanically rolled |
| - | BS EN 10028-6:2003 | Flat products made of steel for pressure purposes Part:6 Weldable fine grain steels, quenched and tempered |
| - | BS EN 10028-7:2003 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| 6 | BS EN 10029: | Tolerances on Hot Rolled steel plate sections 3mm thick or over |
| 7 | BS EN 10055:1996 | Hot rolled steel equal flange tees with radiused root and toes. Dimensions and tolerances on shape and dimensions |
| 8 | BS EN 10056-1:1999 | Specification for structural steel equal and unequal angles. Dimensions |
| 9 | BS EN 10079 | Definition of Steel Products |
| 10 | DD ENV 10080:1996 | Steel for the reinforcement of concrete |
| 11 | BS EN 10083-1:1991 | Quenched and tempered steels:Technical delivery conditions for special steels |
| - | BS EN 10083-2:1991 | Quenched and tempered steels: Technical delivery conditions for unalloyed quality steels |
| - | BS EN 10083-3:1996 | Quenched and tempered steels: Technical delivery conditions for boron steels |
| 12 | BS EN 10084:1998 | Case hardening steels - Technical delivery conditions |
| 13 | BS EN 10085:2001 | Nitriding steel. Technical delivery conditions |
| 14 | BS EN 10087:1999 | Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods |
| 15 | BS EN 10088-1:1995 | Stainless steels. List of stainless steels |
| - | BS EN 10088-2:1995 | Stainless steels. Technical delivery conditions for sheet/plate and strip for general purposes |
| - | BS EN 10088-3:1995 | Stainless steels. Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes |
| 16 | BS EN 10089:2002 | Hot rolled steels for quenched and tempered springs. Technical delivery conditions. |
| 17 | BS EN 10090:1998 | Valve steels and alloys for internal combustion engines |
| 18 | BS EN 10095:1999 | Heat resisting steels and nickel alloys |
| 19 | BS EN 10106:1996 | Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state |
| 20 | BS EN 10107:1996 | Grain oriented electrical steel sheet and strip delivered in the fully processed state |
| 21 | BS EN 10111:1998 | Continuously hot rolled low carbon steel sheet and strip for cold forming |
| 22 | BS EN 10113-2:1993 | Hot rolled products in weldable fine grain structural steel |
| - | BS EN 10113-3:1993 | Hot rolled products in weldable fine grain structural steel |
| 23 | BS EN 10120:1997 | Steel sheet and strip for welded gas cylinders |
| 24 | BS EN 10131:1991 | Cold-rolled uncoated low carbon and high yield strength steel flat products for cold forming. Tolerances on dimensions and shape |
| 25 | BS EN 10126:1996 | Cold rolled electrical non-alloy steel sheet and strip delivered in the semi-processed state |
| 26 | BS EN 10130:1999 | Cold rolled low carbon steel flat products for cold forming |
| 27 | BS EN 10132-2:2000 | Cold rolled narrow steel strip for heat treatment |
| - | BS EN 10132-2:2000 | Cold rolled narrow steel strip for heat treatment |
| - | BS EN 10132-3:2000 | Cold rolled narrow steel strip for heat treatment |
| - | BS EN 10132-4:2000 | Cold rolled narrow steel strip for heat treatment |
| 28 | BS EN 10137-2:1996 | Plates and wide flats made of high yield strength structural steel | - | BS EN 10137-3:1996 | Plates and wide flats made of high yield strength structural steel | 29 | BS EN 10139:1998 | Cold rolled uncoated mild steel narrow strip for cold forming | 30 | BS EN 10142:2000 | Continuously hot dip zinc coated mild steel strip and sheet for cold forming | 31 | BS EN 10147:2000 | Continuously hot dip zinc coated steel strip and sheet | 32 | BS EN 10149-2:1996 | Hot rolled flat products made of high yield strength steels for cold forming | - | BS EN 10149-3:1996 | Hot rolled flat products made of high yield strength steels for cold forming | 33 | BS EN 10151:2002 | Stainless steel strip for springs | 34 | BS EN 10152:1994 | Electrolytically zinc coated cold rolled steel flat products | 35 | BS EN 10152:2003 | Electrolytically zinc coated cold rolled steel flat products for cold forming | 36 | BS EN 10154:2002 | Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet | 37 | BS EN 10155:1993 | Structural steel with improved atmospheric corrosion resistance | 38 | BS EN 10165:1996 | Cold rolled electrical alloy steel sheet and strip delivered in the semi processed state | 39 | BS EN 10202:2001 | Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel | 40 | BS EN 10205:1992 | Cold reduced black plate in coil form for the production or tinplate or electrolytic chromium/chromium oxide coated steel | 41 | BS EN 10207:1992 | Steels for simple pressure vessels | 42 | BS EN 10208-1:1998 | Steel pipes for pipelines for combustible fluids | 43 | BS EN 10208-2:1997 | Steel pipe for pipelines for combustible fluids. Technical delivery conditions | 44 | BS EN 10209:1996 | Cold rolled low carbon steel flat products for vitreous enamelling |
| 45 | BS EN 10210-1:1994 | Hot finished structural hollow sections of non-alloy and fine grain structural steels. Technical delivery requirements |
| - | BS EN 10210-2:1997 | Hot finished structural hollow sections of non-alloy and fine grain structural steels. Tolerances, dimensions and sectional properties |
| 46 | BS EN 10213-2:1996 | Technical delivery conditions for steel castings for pressure purposes |
| - | BS EN 10213-3:1996 | Technical delivery conditions for steel castings for pressure purposes |
| - | BS EN 10213-4:1996 | Technical delivery conditions for steel castings for pressure purposes |
| - | BS EN 10214:1995 | Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet |
| 47 | BS EN 10215:1995 | Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet |
| 48 | BS EN 10216-1:2002 | Seamless tubes for pressure purposes - Non-alloy steel tubes with specified room temperature properties"> |
| - | BS EN 10216-2:2002 | Seamless tubes for pressure purposes - Non-alloy and alloy steel tubes with specified elevated temperature properties |
| - | BS EN 10216-3:2002 | Seamless tubes for pressure purposes - Alloy fine grain steel tubes |
| - | BS EN 10216-4:2002 | Seamless tubes for pressure purposes - Non-alloy and alloy steel tubes with specified low temperature properties |
| 49 | BS EN 10217-1:2002 | Welded steel tubes for pressure purposes - Non-alloy steel tubes with specified room temperature properties |
| - | BS EN 10217-2:2002 | Welded steel tubes for pressure purposes - Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| - | BS EN 10217-3:2002 | Welded steel tubes for pressure purposes - Alloy fine grain steel tubes |
| - | BS EN 10217-4:2002 | Welded steel tubes for pressure purposes - Electric welded non-alloy steel tubes with specified low temperature properties |
| - | BS EN 10217-5:2002 | Welded steel tubes for pressure purposes - Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| - | BS EN 10217-6:2002 | Welded steel tubes for pressure purposes - Submerged arc welded non-alloy steel tubes with specified low temperature properties |
| 50 | BS EN 10219-1:1997 | Cold formed welded structural hollow sections of non-alloy and fine grain steel |
| 51 | BS EN 10222-1:1998 | Steel forgings for pressure purposes. General requirements for open die forgings |
| - | BS EN 10222-2:2000 | Steel forgings for pressure purposes. Ferritic and martensitic steels with specified elevated temperature properties |
| - | BS EN 10222-3:1999 | Steel forgings for pressure purposes. Nickel steels with specified low-temperature properties |
| - | BS EN 10222-4:1999 | Steel forgings for pressure purposes. Weldable fine-grain steels with high proof strength |
| - | BS EN 10222-5:2000 | Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels |
| 52 | BS EN 10224:2002 | Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption |
| 53 | BS EN 10225:2001 | Weldable structural steels for fixed offshore structures. Technical delivery conditions |
| 54 | BS EN 10248-1:1996 | Hot rolled sheet piling of non-alloy steels |
| 55 | BS EN 10249-1:1996 | Cold formed sheet piling of non-alloy steels |
| 56 | BS EN 10250-2:1999 | Open die steel forgings for general engineering purposes |
| - | BS EN 10250-3:1999 | Open die steel forgings for general engineering purposes |
| - | BS EN 10250-4:1999 | Open die steel forgings for general engineering purposes |
| 57 | BS EN 10253-1:1999 | Butt welding pipe fittings |
| 58 | BS EN 10263-2:2001 | Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working |
| 59 | BS EN 10224:2002 | Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption. Technical delivery conditions |
| 60 | BS EN 10225:2001 | Weldable structural steels for fixed offshore structures. Technical delivery conditions |
| 61 | BS EN 10248-1:1996 | Hot rolled sheet piling of non alloy steels. Technical delivery conditions |
| 62 | BS EN 10249-1:1996 | Cold formed sheet piling of non alloy steels. Technical delivery conditions |
| 63 | BS EN 10250-1:1999 | Open steel die forgings for general engineering purposes. General requirements |
| - | BS EN 10250-2:1999 | Open steel die forgings for general engineering purposes. Non-alloy quality and special steels |
| - | BS EN 10250-3:1999 | Open steel die forgings for general engineering purposes. Alloy special steels |
| - | BS EN 10250-4:1999 | Open steel die forgings for general engineering purposes. Stainless steels |
| 64 | BS EN 10253-1:1999 | Butt-welding pipe fittings. Wrought carbon steel for general use and without specific inspection requirements |
| 65 | BS EN 10263-1:2001 | Steel rod, bars and wire for cold heading and cold extrusion. General technical delivery conditions |
| - | BS EN 10263-2:2001 | Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for steels not intended for heat treatment after cold working |
| - | BS EN 10263-3:2001 | Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for case hardening steels |
| - | BS EN 10263-4:2001 | Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for steels for quenching and tempering |
| - | BS EN 10263-5:2001 | Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for stainless steels |
| 66 | BS EN 10264-1:2002 | Steel wire and wire products. Steel wire for ropes. General requirements |
| - | BS EN 10264-2:2002 | Steel wire and wire products. Steel wire for ropes. Cold drawn non alloy steel wire for ropes for general applications |
| - | BS EN 10264-3:2002 | Steel wire and wire products. Steel wire for ropes. Round and shaped non alloyed steel wire for high duty applications |
| - | BS EN 10264-4:2002 | Steel wire and wire products. Steel wire for ropes. Stainless steel wire |
| 67 | BS EN 10265:1996 | Magnetic materials. Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
| 68 | BS EN 10267:1998 | Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
| 69 | BS EN 10268:1999 | Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming. General delivery conditions |
| 70 | BS EN 10269:1999 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties. |
| 71 | BS EN 10270-1:2001 | Steel wire for mechanical springs. Patented cold drawn unalloyed spring steel wire |
| - | BS EN 10270-2:2001 | Steel wire for mechanical springs. Oil hardened and tempered spring steel wire |
| - | BS EN 10270-3:2001 | Steel wire for mechanical springs. Stainless spring steel wire |
| 72 | BS EN 10271:1999 | Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions |
| 73 | BS EN 10272:2000 | Stainless steel bars for pressure purposes |
| 74 | BS EN 10273:2000 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| 75 | BS EN 10277-1:1999 | Bright steel products. Technical delivery conditions. General |
| - | BS EN 10277-2:1999 | Bright steel products. Technical delivery conditions. Steels for general engineering purposes |
| - | BS EN 10277-3:1999 | Bright steel products. Technical delivery conditions. Free cutting steels |
| - | BS EN 10277-4:1999 | Bright steel products. Technical delivery conditions. Case-hardening steels |
| - | BS EN 10277-5:1999 | Bright steel products. Technical delivery conditions. Steels for quenching and tempering |
| 76 | BS EN 10279:2000 | Hot rolled steel channels. Tolerances on shape, dimension and mass |
| 77 | BS EN 10283:1999 | Corrosion resistant steel castings |
| 78 | BS EN 10295:2002 | Heat resistant steel castings |
| 79 | BS EN 10296-1:2003 | Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions. Non-alloy and alloy steel tubes |
| 80 | BS EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions. Non-alloy and alloy steel tubes |
| 81 | BS EN 10302:2002 | Creep resisting steels, nickel and cobalt alloys |
| 82 | BS EN 10304:2001 | Magnetic materials (iron and steel) for use in relays |
| 83 | BS EN 10305-1 : 2002 | Steel tubes for precision applications. Technical delivery conditions. Seamless cold drawn tubes |
| - | BS EN 10305-2 : 2002 | Steel tubes for precision applications. Technical delivery conditions. Welded cold drawn tubes |
| - | BS EN 10305-3 : 2002 | Steel tubes for precision applications. Technical delivery conditions. Welded cold sized tubes |
| - | BS EN 10305-4:2003 | Steel tubes for precision applications. Technical delivery conditions. Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| - | BS EN 10305-5:2003 | Steel tubes for precision applications. Technical delivery conditions. Welded and cold sized square and rectangular tubes |
| 84 | BS EN 10331:2003 | Magnetic materials. Specification for sintered soft magnetic materials |
| 85 | PD 970:2001 | Wrought steels for mechanical and allied engineering purposes. Requirements for carbon, carbon manganese and alloy hot worked or cold finished steels- to replace BS 970-1 :1996 |
| 86 | BS EN 25817:1992, ISO 5817:1992 | Arc Welded joints in steel: guidance on quality levels for imperfections |