Tee bars Dimensions

These Pages include various standards. To confirm the status of any standard, identify the replacement standard if it is obsolete and/or purchase the standard please use.

BSI Shop

It is also possible to become a BSI member and obtain copies of the Standards at much reduced prices.

Steel Section Index

Tee Bars...BS 4-1:1971 (Superseded by BS 4: 1993)

Please don't use for new designs

Dimensions

M = Mass per m , A= Width of Section, B= Depth of Section, T = Flange/Web Thickness, R1 = Root radius, R2 = Toe Radius. Area = Area of Section, S = Slope Inside Flange

Serial Size	M	A	B	T	Radius		Area
Serial Size	M	A	B	T	R1	R2	Area
mm	kg	mm	mm	mm	mm	mm	cm²
152 x 152	36	152.4	152.4	15.9	12.2	8.6	45.97
152 x 152	29	152.4	152.4	12.7	12.2	8.6	37.23
152 x 152	30	152.4	101.6	15.9	10.7	7.4	37.94
152 x 102	24	152.4	101.6	12.7	10.7	7.4	30.78
152 x 76	22	152.4	76.2	12.7	9.9	6.9	27.55
152 x 76	16	152.4	76.2	9.5	9.9	6.9	21.02
127 x 102	22	127.0	101.6	12.7	9.9	6.9	27.55
127 x 102	16	127.0	101.6	9.5	9.9	6.9	20.96
127 x 76	19	127.0	76.2	12.7	9.1	6.4	24.32
127 x 76	15	127.0	76.2	9.5	9.1	6.4	28.58
102 x 102	19	101.6	101.6	12.7	9.1	6.4	24.25
102 x 102	15	101.6	101.6	9.5	9.1	6.4	18.51
102 x 76	16	101.6	76.2	12.7	8.4	5.8	21.02
102 x 76	13	101.6	76.2	9.5	8.4	5.8	16.13
76 x 76	11	76.2	76.2	9.5	7.6	5.3	13.67
64 x 64	9	63.5	63.5	9.5	6.9	4.8	11.22
64 x 64	6	63.5	63.5	6.4	6.9	4.8	7.74
51 x 51	5	50.8	50.8	6.4	6.1	4.3	6.06
38 x 38	4	38.1	38.1	6.4	5.3	3.8	4.45

Steel Section Index